Aircraft Openings- Wichita

Please apply today for these exciting new openings for a brand new aircraft program in Wichita Kansas. 2 Engineer/Designer,  Systems and Installations 2  Systems installation design - 12 years experience with Aero or mechanical Engineering degree 2 Engineer/Designer - Flight Control Installation 12 years experience with Aero or Mechanical Engineering degree, flight control design experience1 Engineer — Mechanical Systems — Flight Controls Manual Primary Flight Control Experience - Minimum 5 years experience Prior experience with FAA Certification CATIA Experience preferred1 Engineer — Mechanical Systems — Flight Controls Manual Primary Flight Control Experience Minimum 10 years experience Prior experience with FAA Certification CATIA Experience Preferred1 Engineer  - Air Management Systems One Grade 62 or above Engineer or Grade 07 or above Designer with experience in bleed air pressurization systems and associated controls, and vapor-cycle air conditioning systems.  A working knowledge of FAA Certification processes and experience with at least one FAA ECS and AC system certification program is preferred1 Engineer — Airframe and Engine Ice Protection Systems 1 Ambridge, Timothy 10 years experience in Airframe and Engine Ice1 Engineer, Aircraft and Performance - DER Prep flight test plans/control flight test analysis Minimum 5 years1 Engineer, Aerodynamics & Technical 3-5 years experience in Stability and Control1 Engineer, Aerodynamics -Applied Aero 5 year minimum in Computational Aerodynamics1 Engineer, Mechanical Systems — Landing Gear Mechanical Engineer 5 years minimum experience -trade-off studies, performance analysis and subsequent integration/certification of the Landing Gear1 Engineer, Mechanical Systems — Landing Gear Mechanical Engineer 10 year minimum exp. -trade-off studies, performance analysis and subsequent integration/certification of the Landing Gear2 Program Managers 5 to 10+ years of program and organizational management experience within in aerospace or a related industry.  Masters degree in Business, Engineering or a related discipline or a Bachelors degree with an additional 3 to 5 years work experience with a basic knowledge of aircraft development, systems, production and related processes.1 Engineer — Mechanical Systems — Hydraulics Landing gear/Hydro mechanical IPDT 10 years experience and FAA certification experience1 Engineer, Aircraft Performance DER preferred, flight science1 Materials Engineer Minimum of Bachelors Degree in Engineering Minimum of 8 years of applicable Materials experience, preferably in working with composites. Strong technical ability including experience with Certification rules and requirements.  DER or ability to grow into DER position preferred.1 Stress Engineer Minimum of Bachelors Degree in Engineering Aerospace/Mechanical Engineering (MS preferred).  Minimum of 5 years applicable structural design analysis experience.  General knowledge of fatigue damage tolerance and fracture mechanics.1 Lead Stress Engineer Minimum of Bachelors Degree in Engineering Aerospace/Mechanical Engineering (MS preferred). Minimum of 12 years of applicable aircraft structural design and stress analysis experience.1 Stress Engineer Minimum of Bachelors Degree in Aerospace/Mechanical Engineering (MS preferred).  Minimum of 10 years of applicable aircraft structural design and stress analysis experience, preferably in working with composites1 Systems Safety Engineer Bachelors degree in engineering, a related curriculum, or equivalent combination of appropriate education and experience.  Must have detailed knowledge of the existing system safety processes and tools used to execute the process.  Must also be familiar with requirements and guidelines of 14 CFR 25.1309, and AC 25.1309, as well as the RMAS process as contained in ARP4761, and ARP 4754. 211 Systems Safety Engineer Bachelors degree in engineering, a related curriculum, or equivalent combination of appropriate education and experience.  Must have detailed knowledge of the existing system safety processes and tools used to execute the process.  Must also be familiar with requirements and guidelines of 14 CFR 25.1309, and AC 25.1309, as well as the RMAS process as contained in ARP4761, and ARP 4754. 221 Systems Safety Engineer Bachelors degree in engineering, a related curriculum, or equivalent combination of appropriate education and experience.  Must have detailed knowledge of the existing system safety processes and tools used to execute the process.  Must also be familiar with requirements and guidelines of 14 CFR 25.1309, and AC 25.1309, as well as the RMAS process as contained in ARP4761, and ARP 4754.231 Reliability Engineer Bachelors degree in engineering, a related curriculum, or equivalent combination of appropriate education and experience.  Must have detailed knowledge of the existing reliability processes and tools used to execute the process.  Must also be familiar with requirements and guidelines of 14 CFR 25.1309, and AC 25.1309, as well as the RMAS process as contained in ARP4761, and ARP 4754.1 Engineer — Avionics Systems - New Product Development 10 years avionics exp/Electrical Degree1 Engineer — Avionics Systems - New Product Development 5 years avionics exp/Electrical Degree1 Engineer — Avionics Systems - New Product Development 3 years avionics exp/Electrical Degree1 Engineer — Electrical - New Product Development A bachelors degree (or equivalent) in Electrical Engineering or related discipline.  A minimum of 3 years experience in electrical systems integration and design.  A good working knowledge of FAA certification requirements.1 Electrical Harness System Engineer - New Product Development A bachelors degree (or equivalent) in Electrical Engineering or related discipline.  A minimum of 5 years experience in electrical systems integration and design.  A good working knowledge of FAA certification requirements.1 Operations IPDT Manager Candidate must have a minimum of 2 years experience with using lean manufacturing concepts and practices, have experience implementing lean manufacturing.  Sub Assembly or Final Assembly of composite aircraft experience a must.  Candidate must also have the following experience:  new product development, planning the assembly of new products, line set up, budget estimating, capital expenditure planning and justification, material flow planning, MRP / ERP system and lean manufacturing.1 Engineer, Mechanical Systems The candidate shall be a university graduate in mechanical engineering. The candidate has preferably been directly involved with mechanical systems.1 Engineering Integrator Engineering Degree Aircraft Product Development experience - At least 8+ years in the Aircraft industry - Planning, Scheduling  & Control1 Methods Engineer _ DELMIA support Bachelor's Degree, technical degree, or the equivalent. 5+ years experience in manufacturing, logistics or systems engineering Experience with VBA/Java scripting, Oracle Db, SQL · Experience with any of the following:  Enterprise product data management, configuration management, bill of material (BOM) systems, hierarchical data structures Knowledge or experience with 3D CAD and PLM concepts Apply today !!